40x40 Twyford FGB Beige Ceramic Floor Tile

The 40x40 Twyford FGB Beige Ceramic Tile is a 40x40cm ceramic tile with a glossy surface, specified for decorative indoor wall applications. It is engineered for vertical installations on interior walls, offering a reflective finish that enhances spatial brightness. The price is KES 1,543.50 per box, which contains 10 tiles and covers an area of 1.6 square metres (m²). This equates to KES 964.69 per square metre. The tile provides an aesthetic wall finish suitable for homeowners and property investors. Its lighter weight avoids the structural requirements associated with heavier materials.

Below is a sample cost estimation for typical residential wall areas, excluding adhesive, grout, and labour.

Application & Environmental Suitability

The 40x40 Twyford FGB Beige Ceramic Tile is specified exclusively for wall use in residential and light-commercial interiors. Its primary applications include living room feature walls, bedroom accent walls, complete bathroom walls, and kitchen walls or splashbacks. The tile's ceramic body and medium durability rating mean it is not intended for any floor use, external applications, or areas subject to heavy impacts or frost.

The tile's glossy, light-reflective surface is particularly effective in compact urban living spaces, such as apartments in Nairobi, where it can create an illusion of greater depth and brightness. In high-humidity environments like those found in coastal regions such as Mombasa, its non-porous glazed surface resists moisture ingress. This functional characteristic helps prevent damp and mould growth on the underlying substrate when installed correctly with appropriate waterproofing and grout.

Technical & Material Properties

The technical characteristics of the 40x40 Twyford FGB Beige Ceramic Tile determine its performance and suitability for the intended applications. The tile holds a "Medium" durability rating, indicating it is resistant to light scuffs, chemical cleaners, and staining typical of a wall environment. It is not designed to withstand the abrasive conditions or point loads associated with foot traffic. Its key properties are detailed below.

As a ceramic tile, it possesses a lower density than porcelain, making it lightweight and simplifying handling for vertical installation. This composition allows for clean, straightforward cuts using a standard manual tile cutter, which can reduce installation time and material wastage on site. The glossy beige finish is a result of a fired-on glaze that is integral to the tile body, ensuring the colour will not fade from UV exposure or cleaning over time.

Installation & Long-Term Maintenance

For a secure and lasting installation, the 40x40 Twyford FGB Beige Ceramic Tile must be fixed to a clean, level, and prepared substrate using a standard thin-set tile adhesive suitable for ceramic wall tiles. Due to the tile's pressed edges, which have a slight curvature, a minimum grout line of 3mm is recommended. This spacing accommodates minor dimensional variations between tiles and ensures a uniform final appearance.

Grout colour selection directly impacts the final aesthetic. To achieve a monolithic, seamless appearance that makes a space feel larger, a beige or light cream grout that matches the tile body is advised. For a more defined look that accentuates the 40x40cm grid pattern, a contrasting light grey or white grout can be specified. The glossy surface of the tile requires regular maintenance to retain its lustre. Cleaning should be performed with a soft cloth and a pH-neutral cleaning solution diluted in water. Abrasive powders, acidic cleaners, or hard-bristle brushes must be avoided, as they can permanently scratch or dull the glazed surface. The tile is non-porous and does not require any sealing after installation.