60x120 Carrara White Marble Effect

The 60x120 Carrara White Marble Effect is a 60x120cm porcelain tile with a high gloss surface. It is engineered for residential interior floors and walls, offering high resistance to wear and moisture. This product is priced per box, which contains 2 tiles and covers 1.44 square metres. The cost is KES 2,500.00 per box, equating to approximately KES 1,737 per square metre. Below is a sample cost estimation for typical residential applications, excluding installation and ancillary materials.

Application & Regional Suitability

This tile is specified for high-value residential interiors. Its large format (60x120cm) is effective in creating an expansive, continuous surface with fewer grout lines, making it suitable for open-plan living rooms, dining areas, and large hallways. The high gloss finish possesses a high light reflectance value (LRV), which helps to brighten spaces with limited natural light. This characteristic is particularly beneficial for ground-floor apartments in urban areas like Nairobi, where it can amplify ambient light and create a sense of greater volume.

The tile's technical properties also make it suitable for specific environments. For master bathroom walls, its extremely low water absorption rate provides a durable barrier against moisture ingress. In humid coastal climates such as Mombasa, the non-porous porcelain body prevents damage from sustained high humidity, resisting mould and mildew growth. The tile's high gloss finish suits bathroom walls. Wet room floors require high slip resistance; therefore, this finish is unsuitable for those areas.

Technical Specifications & Performance

The performance of the 60x120 Carrara White Marble Effect tile is directly attributable to its material composition and manufacturing process. The high-density porcelain body, fired at high temperatures, results in a tile with high mechanical strength and durability. This composition ensures resistance to the stresses of heavy residential foot traffic, abrasion, and surface impact. Its frost-proof rating indicates suitability for unheated interior areas that may experience significant temperature fluctuations.

Installation & Maintenance Guidelines

Correct installation is critical for achieving the intended aesthetic and ensuring long-term performance. The rectified edges of the 60x120cm tile are machine-cut after firing to ensure dimensional uniformity. This allows for installation with minimal grout lines (1.5mm - 2mm), creating a continuous, monolithic appearance. To achieve this, a light grey or white flexible, polymer-modified grout is recommended. Due to the tile's large format and low porosity, a high-quality C2-S1 classification tile adhesive must be used on a level, stable substrate to ensure proper adhesion.

Maintenance is straightforward but requires consistency. The high gloss surface is non-porous and resistant to staining. However, it will show surface dust, footprints, and water spots more readily than a matte tile. Routine cleaning should be performed with a microfibre mop and a pH-neutral cleaning solution. Abrasive powders or acidic cleaners must be avoided as they can damage the gloss finish over time. The tile's vitrified porcelain body does not require periodic sealing or specialised chemical treatments to maintain its integrity.