40x40 Micasso MR Wood Effect Ceramic Tile

The 40x40 Micasso MR Wood Effect Ceramic Tile is a 40x40cm ceramic tile with a matte surface. It is engineered for general indoor floor and wall applications in residential and light commercial settings. The tile is supplied at a price of KES 1680.00 per box, which contains 10 tiles and covers an area of 1.6 square metres. This equates to a cost of KES 1050.00 per square metre, exclusive of adhesive, grout, and labour.

To assist with project planning, the following table provides estimated material costs for common residential floor areas. The calculations include a standard 10% allowance for cuts and wastage.

Application and Suitability

The 40x40 Micasso MR Wood Effect Ceramic Tile is specified for interior use in areas with medium foot traffic. Its functional design makes it suitable for a range of spaces including living rooms, bedrooms, dining areas, and hallways. The tile's durability also extends to light commercial environments such as small office reception areas, boutiques, or consultation rooms where traffic is moderate and consistent.

The tile's composition and finish make it a practical choice across different Kenyan climates. In humid coastal regions like Mombasa, it provides the aesthetic of timber without the risk of warping, swelling, or pest infestation associated with natural wood. In urban environments such as Nairobi, the wood-effect finish and matte texture effectively conceal dust, a significant advantage in city apartments. Its lightweight characteristic is particularly beneficial for vertical (wall) applications in multi-storey buildings, as it imposes a lower structural load compared to denser porcelain or natural stone tiles.

Technical Specifications

The performance of the 40x40 Micasso MR Wood Effect Ceramic Tile is defined by its material composition and manufacturing process. The key specifications are detailed below:

The tile's ceramic body allows for straightforward cutting with standard tile saws, enabling precise and efficient installation around fixtures and architectural features. Its matte finish provides a certified anti-slip rating of R10/R11, which ensures a secure footing in dry conditions and offers slip resistance in areas prone to occasional moisture, such as entrance hallways. The medium durability rating indicates the tile is resistant to the abrasion and wear expected in typical residential environments. The pressed edges are uniform, facilitating consistent grout lines during installation.

Installation and Maintenance

Correct installation and routine maintenance will ensure the longevity and performance of the 40x40 Micasso MR Wood Effect Ceramic Tile. Adherence to standard tiling practices is required.

Installation Guidelines

• Substrate Preparation: Ensure the substrate (floor or wall) is rigid, level, clean, and completely dry before commencing installation.
• Adhesive: Use a high-quality, polymer-modified tile adhesive suitable for ceramic tiles. Apply using a notched trowel to achieve full coverage on the back of each tile.
• Grout Lines: For a continuous wood-floor appearance, a narrow grout joint of 3-5mm is recommended. Pressed-edge tiles require a grout line to accommodate minor size variations.
• Grout Colour: Select a grout colour that closely matches the dominant brown or beige tones of the tile. This minimises the visibility of grout lines and enhances the seamless wood effect.

Maintenance Protocol

• Routine Cleaning: The tile requires minimal maintenance. Regular cleaning can be performed with a soft brush, vacuum, or a damp mop using a pH-neutral cleaning solution.
• Stain Removal: The glazed surface resists most common household stains. Spills should be cleaned promptly to prevent potential staining of the grout.
• Sealing: As a glazed product, the 40x40 Micasso MR Wood Effect Ceramic Tile requires no penetrating or surface sealants.
• Protection: To prevent surface scratching in high-traffic areas, use protective pads on the feet of furniture. Avoid dragging heavy or sharp objects across the floor.